PIAGGIO XEVO 125 Euro 3 Service Station Manual page 153

XEVO 125 Euro 3
Specific tooling
020622Y Transmission-side oil guard punch
Removal
- Remove the cover of the pump control pulley us-
ing the two retainers, as shown in the figure.
- Block the rotation of the oil pump control pulley
inserting a screwdriver through one of its two
holes.
- Remove the central screw with Belleville washer,
as shown in the diagram.
- Remove the chain.
- Remove the control sprocket with relative O-ring.
- Remove the oil pump by unscrewing the two
screws in the figure.
Engine
ENG - 61