Table of Contents
Advertisement
Selected device is not a modem
Channel number out of range: <number>
No DS0 assigned to modem. Test aborted.
Extra targets, only the first will be used
Extra command argument after target: <string>
Receive ignores frequency/amplitude command arguments
Test in progress. Stop it before exiting?
Trap Destination
Invalid IP address: <ip-addr>
You must enter an IP Address!
String 'invalid' may not be used
Community string too long. Truncate?
Comment too long. Truncate?
The target slot is not a modem.
The target channel number is invalid for the particular type of card.
The modem does not have a time slot assignment and tone test is therefore
impossible.
The user selected more than one modem when invoking a tone test. The first
specified modem will be used, and the others ignored. (Warning only)
Unused information was seen at the end of the command line and will be
ignored. (Warning only)
Receive Tone was invoked with frequency/amplitude arguments, which will be
ignored. (Warning only)
Issued in a "Yes/No" dialog when user quits from window frame while a tone
test is in progress. (GUI, warning only)
The following are the Trap Destination error messages and what they indicate.
The IP address entered is not a valid dot-notation IP address or host name in
the host database.
When adding a trap destination, the user entered a blank IP address/host
name. (GUI only)
The community string 'invalid' is a reserved value and is not allowed to be
entered as data. (GUI only)
Issued in an "OK/Cancel" dialog when a community string and/or comment is
entered that is too long. (GUI, warning only)
Issued in an "OK/Cancel" dialog when a community string and/or comment is
entered that is too long. (GUI, warning only)
Execution Errors
97
Advertisement
Table of Contents
