Table of Contents
Advertisement
(parameter)
Parameter whose value is to be printed (for tcmget) or set (for tcmset). (For
example, 'Serial Number'.)
Each parameter should be separated by a space and requires proper shell
quoting. At least one parameter should be supplied per group, unless -L (list
parameters by group) is specified.
Parameter names are matched using substring comparison against the list of
known parameter names within the currently selected group. Substring
matching has the same 'initial match priority' and ambiguity rules as for group
name matching.
(value)
This parameter is available in the tcmset command only.
Value of the parameter. Parameters can be one of the following value types:
Integer—Decimal numeric value.
Display String—Printable characters, suitably quoted.
Octet String—Printable characters, or an ASCII hex string beginning with
'0x' (any string starting with '0x' is assumed to be ASCII hex).
IP Address—IP dot notation.
Object Identifier—Must be a valid numeric object identifier (e.g.
1.3.6.1.4.1.429...)
Enumeration—An enumeration, specified using substring match against
the list of known for this variable (as seen in the Programmed Settings GUI).
Rules for substring match similar to those for group and parameter names
(see the "-G" option above).
Parameter types may be determined by using the -L option
(target)
Configuration 107
Advertisement
Table of Contents
