Table of Contents
Advertisement
8 From the command line prompt, type the following commands and press
9 Type y, and then press Return.
Setting PATH and
LD_LIBRARY_PATH
Return after each:
TCMHOME=<installation directory> (for example, /opt/tcm)
export TCMHOME
mkdir -p $TCMHOME
cd cdrom/cdrom0/tcm_sol (for HP, tcm_ux)
./install
A message appears:
The script will make adjustments, only as needed, to
system files in /etc/imit.d, the crontab, /etc/services,
and /usr/lib/x11.
If TCM is later removed, these adjustments will be
undone to restore the original state.
Do you wish to continue [y/n]
The installation proceeds, listing files as they are installed. The following
message appears to indicate the installation has completed successfully:
TCM installation is complete
You can now enable HP Overview autodiscovery on your system.
Before you can start IP Telephony Manager, you must add $TCMHOME to the
PATH statement and indicate the location of the IP Telephony Manager library
files as follows:
From the command line prompt, type the following commands and press
Return after each:
PATH=$PATH:$TCMHOME/bin
export PATH
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$TCMHOME/lib
export LD_LIBRARY_PATH
Installing IP Telephony Manager
21
Advertisement
Table of Contents
