Chassis Restore; Chassis Save - 3Com CommWorks 5210 User Manual

Channel range contains zero: <target specification>
Time slot range contains zero: <target specification>
Expected slot-level target: <target specification>
Expected time slot-level target: <target specification>
Slot <number> empty: <target specification>
Unknown card in slot <number>
Mismatched targets: slot <number>, slot <number>
Time slot selection not applicable: <target specification>

Chassis Restore

No target specified
Too many targets specified

Chassis Save

Unknown target name or IP address format
A channel range includes 0 (e.g., S1C0-2).
A time slot range contains zero.
The target specification began with a slot-level target but also has targets at
some other level.
The target specification began with a time slot-level target but also has targets
at some other level.
There is no card in the specified slot, based on information available at the last
discovery or IP Telephony Manager Console poll.
The card in the specified slot is unknown and the application does not allow
operation against unknown cards.
The two slots contain cards that are not compatible for the present
application's purposes.
There is no time slot-level support for the particular card for which a time slot
specification was given (e.g., the card is not a T1 or ISDN card).
The following are the Chassis Restore error messages and what they indicate.
The user did not supply an IP address or host name on the command line.
The user specified more than one IP address/host name (there is more than one
white space-separated word in the target list).
The following are the Chassis Save error messages and what they indicate.
The target does not specify a valid IP address or host name.
Invocation Errors 85