Chassis Restore - 3Com CommWorks 5210 User Manual

92 A : E M
PPENDIX RROR ESSAGES
Missing or invalid device.dat file!
Missing or invalid software.dat file!
IP Telephony Manager Discovery error: <specific error>
Invalid host name: <name>
Target Selection Error

Chassis Restore

Configuration parse error: <specific error>
File is not a Chassis Configuration File
Can't access <filename>
<filename> is a directory.
There is no matching configuration to restore
Restore was unsuccessful
IP Telephony Manager has a corrupt device configuration schema, or other
internal error.
IP Telephony Manager has a corrupt device configuration schema, or other
internal error.
An error occurred in attempting to launch IP Telephony Manager against a
chassis (e.g., the discovery process timed out or had some other error).
IP Telephony Manager was launched against a host name not in the hosts
database.
The user was prompted for target slot/channels using the chassis selection
dialog. After targets were selected, an internal error occurred.
The following are the Chassis Restore error messages and what they indicate.
The chassis configuration file being restored is invalid and the restore will not
occur. (Nonfatal configuration parse warnings are also produced.)
The user specified a file that does not begin with the CommWorks chassis
configuration file header.
The user specified a file that does not exist or is not readable.
The user specified a file that is a directory. Only plain text files may be
restored.
The chassis configuration file being restored contains no parameters to be
restored, or those sections which actually match working target slots (if any)
contain no parameters.
At least one of the slots being restored experienced an SNMP error or other
serious failure. ("Bad cards" that are skipped by the restore are not counted in
this evaluation.)