Table of Contents
Advertisement
84
A
: E
M
PPENDIX
RROR
ESSAGES
Invocation Errors
Command Line Target
Selection
Range out of order <target specification>
Slot selection is not allowed <target specification>
Channel selection is not allowed <target specification>
Time slot selection is not allowed <target specification>
Slot number out of range <target specification>
Channel number out of range <target specification>
Channel number out of range at slot <target specification>
This topic describes the error messages that can occur from a command syntax
error.
The invocation errors categories listed here are:
Command Line Target Selection
Chassis Restore
Chassis Save
Command Tool
Configuration Tool
Software Download
Test Tool
IP Telephony Manager Console
Tone Send/Receive
Trap Destination
The following are the Command Line Target Selection error messages and a
description of what they indicate.
A range is backwards (e.g., S5-3 instead of S3-5).
The application cannot be invoked at the slot level.
The application cannot be invoked at channel level (e.g., software download).
The application cannot be invoked at time slot level. (True for all except
commands.)
A slot number refers to a slot out of range for the given type of chassis. (e.g.,
slot 10 in a 7-slot chassis.
A large channel number (not valid for any IP Telephony Manager card) was
specified.
A channel number refers to a channel not present on the given type of card in
the selected slot.
Advertisement
Table of Contents
