Table of Contents
Advertisement
60
C
3: N
HAPTER
AVIGATING AND
Software Download
Submenu
Inventory Submenu
U
S
SING THE
YSTEM
Execute—Executes the selected command for the selected targets.
Close—Closes the Command Tool window.
The Software Download submenu displays the files to be downloaded for the
specified entity. You then select the files you need to be downloaded. Refer to
Chapter 4 for more information.
The Inventory submenu displays the inventory information for each
component on the selected chassis (IP Telephony Manager Chassis Console
only).
Figure 35 Inventory Window
The Inventory window contains the following fields:
Slot #—Each entry in the inventory data table is labeled by its slot number
in the chassis.
Description—Textual description of the displayed chassis.
Serial Number—Serial number of the component.
Product Code—Hardware product code of the component.
Hardware version—Hardware version of the component.
DRAM (KB)—Amount of dynamic RAM installed in the component.
Flash RAM—Amount of flash RAM installed in the component.
DIP Switches—A bit field value displaying DIP switch settings currently in
effect.
Graphically, the displayed binary corresponds to settings as follows:
DIP Switch Numbers: 16151413121110987654321
Bit Field Placeholders: 0000000000000000
Where a "1" at any of the above positions means that the corresponding
DIP switch is ON.
Advertisement
Table of Contents
