Software Download; Upgrade File Identification; Table 11 Sample Breakdown Of Sdl And Nac Filenames - 3Com CommWorks 5210 User Manual

Software Download

Upgrade File
Identification
To run tcmsdl, issue the following command:
tcmsdl [-s sdlfile] [-n nacfile] [-F] [-v] target
Where:
sdlfile
The SDL file name (if omitted, uses latest version available for card type).
nacfile
The NAC file name (if omitted, uses latest version available for card type).
-F
Force download to an NMC that is already in a download state.
Default directory for .nac and .sdl files is $TCMHOME/data/sdl.
For example:
tcmsdl -s qf020202.sdl -n qf030000.nac
192.77.203.127:S11-12
This example uses the Quad Modem SDL file qf020202.sdl and Quad Modem
NAC file qf030000.nac to update the modem code in slots 11 and 12 of the
chassis with IP address 192.77.203.127.
SDL and NAC filenames contain identifying information about card type,
version level, and file type. The examples below show how to interpret this
information from the filename:

Table 11 Sample Breakdown of SDL and NAC Filenames

Filename Card-specific Prefix
nm040100.nac nm
qf030005.nac qf
li010101.sdl li
Software Download 117
Version # File Type
4.1.0 NAC
3.0.5 NAC
1.1.1 SDL