Restarting After Parameter Changes; Figure 51 Asterisks Parameter Example - 3Com CommWorks 5210 User Manual

76 C 4: M
HAPTER AINTENANCE
The entity has been successfully restarted.
Restarting after There are various parameters located under the Configuration menu that can
Parameter Changes be set to meet your requirements. The parameters that are prefixed with an
asterisks (*) require that the entity be restarted when changes are made to the
parameter.
The following figure displays some of the parameters with the asterisks (*).

Figure 51 Asterisks Parameter Example

If changes are made to any parameter with an asterisk, the entity selected will
need to be restarted for the new values to be recognized.
If you need to restart the Gateway, you need to restart the edge server Plugin
Manager Service (EPMS). To restart the EPMS, you can either restart the 3Com
Gateway on IP Telephony Manager or stop and start the EPMS service from the
service applet on the Windows NT machine. Refer to the Total Control 1000
Media Gateway Guide for more information.
If you need to restart the Gatekeeper, you can either restart 3Com Gatekeeper
on IP Telephony Manager, or stop and start 3Com VoIP Gatekeeper service
applet on Windows NT machine. Refer to the CommWorks 4200 Gatekeeper
Guide for more information.