Table of Contents
Advertisement
86
A
: E
M
PPENDIX
RROR
ESSAGES
Error, unexpected command line format
Command Tool
Missing -E option
Missing -G option
Non-graphical time slot selection is not supported: <specification>
Warning: force not supported for this command
Error: invalid poll interval value <value> for -p option
Error: cannot use -E and -q at the same time
Error: No target specified
Error: Too many targets specified
Invalid target format
Configuration Tool
Error: No target specified
The user did not supply an IP address, or (Non-GUI only) did not provide a
filename.
The following are the Command Tool error messages and what they indicate.
The user did not choose a command to execute using the -E option. (Non-GUI
only)
The user did not choose a command group using the -G option. (Non-GUI
only)
The user requested time slot selection in the non-GUI by supplying an empty
time slot range (e.g., S1C1T). (Non-GUI only)
The user provided the -F option for a command that does not allow forcing.
The -F option will be ignored. (Non-GUI, warning only)
The poll interval value given on the command line is not a positive integer.
The user specified both a command and a command query. This is not allowed.
The user did not supply at least an IP address or host name on the command
line.
The user specified more than one IP address/slot-channel combination. (There
is more than one whitespace-separated word in the target list.)
The target does not specify a valid IP address or host name.
The following are the Configuration Tool error messages and what they
indicate.
The user did not supply at least an IP address or host name on the command
line.
Advertisement
Table of Contents
