3Com CommWorks 5210 User Manual page 91

Error constructing target specification...hostname no longer valid?
Target not responding because NMC is in a software download state. Please wait until software
download is completed.
NMC in software download state!
SNMP Get: <error>
SNMP Get-Next: <error>
SNMP Set: <error>
Cannot find device files for NMC version <version>!
This device is not a IP Telephony Chassis. Exiting.
Missing or invalid card.dat file!
The user was prompted for target slot/channels using the chassis selection
dialog. After targets were selected, the construction of a target failed,
probably because an IP host name could not be found in the hosts database
even though the host name was valid at program initialization. (The host
database has probably been changed or is no longer accessible.)
The NMC is being actively downloaded, or a download was initiated and not
finished. It will not respond to SNMP requests until download is completed.
The NMC is being actively downloaded, or a download was initiated and not
finished. It will not respond to SNMP requests until download is completed.
An error occurred while IP Telephony Manager was issuing an SNMP operation:
either a timeout or an SNMP protocol error. If it is a protocol error, the SNMP
variable information in the error response can be seen in the IP Telephony
Manager log (e.g., syslog).
An error occurred while IP Telephony Manager was issuing an SNMP operation:
either a timeout or an SNMP protocol error. If it is a protocol error, the SNMP
variable information in the error response can be seen in the IP Telephony
Manager log (e.g., syslog).
An error occurred while IP Telephony Manager was issuing an SNMP operation:
either a timeout or an SNMP protocol error. If it is a protocol error, the SNMP
variable information in the error response can be seen in the IP Telephony
Manager log (e.g., syslog).
IP Telephony Manager is communicating with an NMC version too recent for it.
Contact CommWorks sales personnel for a newer version of IP Telephony
Manager.
IP Telephony Manager was launched against an SNMP device that was not an
Enterprise Network Hub or Modem Pool.
IP Telephony Manager has a corrupt device configuration schema, or other
internal error.
Execution Errors 91