Notes On Cleaning The Devices; Other Important Information; Fcc Class A Compliance Statement - Fujitsu ETERNUS CS800 Getting Started Manual

Important Information

Notes on Cleaning the Devices

V
Wipe the device casing with a dry cloth. If particularly dirty, use a cloth that has been
moistened in a mild domestic detergent and then carefully wrung out.

Other Important Information

Keep this operating manual and the other documentation (such as the Technical Manual,
DVD) close to the device. All documentation must be included if the equipment is passed
on to a third party.

FCC Class A Compliance Statement

If there is an FCC statement on the device, then:
The following statement applies to the products covered in this manual, unless otherwise
specified herein. The statement for other products will appear in the accompanying
documentation.
NOTE
This equipment has been tested and found to comply with the limits for a "Class A" digital
device, pursuant to Part 15 of the FCC rules and meets all requirements of the Canadian
Interference-Causing Equipment Standard
ICES-003 for digital apparatus. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in strict accordance
with the instructions, may cause harmful interference to radio communications. However,
there is no warranty that interference will not occur in a particular installation.
U41842-J-Z125-1-76
CAUTION!
Switch the device off and disconnect the power plugs from the grounded shock-
●
proof sockets.
Do not clean any interior parts yourself; leave this job to a service technician.
●
Do not use any cleaning agents that contain abrasives or may corrode plastic.
●
Ensure that no liquid enters the system. Ensure that the ventilation areas of the
●
device are clear.
FCC Class A Compliance Statement
19