Before Using; Features - FUTABA 3GR-2.4G Instruction Manual

3-channel, fasst radio control system for car
Table of Contents

Advertisement

Before Using

Features

This system is based on the combination of the newly developed 2.4GHz transmitter
and its corresponding receiver. The system utilizes the 2.4GHz-SS radio communica-
tion and an ultra small antenna. In addition, the system inherits Futaba's unique HRS
(High Response System).
- 2.4GHzSS (Spread Spectrum) radio communication system
- Frequency channel setting unnecessary
Sifting the channels within the 2.4GHz band automatically, this system minimizes
the interference from other 2.4GHz systems.
- Accepts no unwanted signals by using ID code
- The function "Auto-Detect" is utilized to automatically determine which mode
is active, HRS or PPM mode. (R603FF)
- Short and small antenna (T3GR-2.4G)
- Simple segment type LCD display and four edit keys for easy data setup
- 10 model memory
Model names can use up to 3 letters, numbers, and symbols so that easily understood
names can be set. Model copy function simplifies creation of a model memory with
different fine setups.
- Two function groups: Frequently used functions / System functions
Frequently used functions can be easily called from the initial screen with Select Key
(SEL).
- Brake mixing for large cars (BMX)
Brake mixing of the front and rear wheels of 1/5GP cars, etc. has balance adjustment
functions.
- Steering dual rate (D/R-ST)
Steering angle can be adjusted with digital trim lever.
- Anti-skid Braking System (ABS)
This function applies the brakes so that the tires of gasoline engine cars, etc. do not
lose their grip on the road even when braking at corners.
- Throttle acceleration (ACC)
Gasoline engine cars have a time lag before the clutch and brakes are connected. The
ACC function minimizes this time lag.
- Steering speed (SPD)
When you sense that the steering servo is too fast, etc., the servo operating speed
(direction that suppresses the maximum speed) can be adjusted.
- Racing timer (TIMER) : Up timer or Down timer can be selected.
A lap time can record 100 lap times and the total time. The timer can also be started
automatically by trigger operation. The race time can be set.
12

Advertisement

Table of Contents
loading

Table of Contents