Enabling/Disabling Protocols - Ricoh PRO C900 Operating Instructions Manual

5. Enhanced Network Security
7. Click [Logout].

Enabling/Disabling Protocols

This can be specified by the network administrator.
Specify whether to enable or disable the function for each protocol. By making this setting, you can specify
which protocols are available and so prevent unauthorized access over the network. Network settings can
be specified on the control panel, or using Web Image Monitor or telnet. For details about making settings
using telnet, see "Remote Maintenance by telnet", Network Guide. To disable SMTP on Web Image
Monitor, in E-mail settings, set the protocol to anything other than SMTP. For details, see Web Image
Monitor Help.
For details about logging on and logging off with administrator authentication, see "Logging on Using
Administrator Authentication", "Logging off Using Administrator Authentication".
5
Protocol
IPv4
IPv6
FTP
98
Port
-
-
TCP:21
Setting Method
• Control Panel
• Web Image Monitor
• telnet
• Control Panel
• Web Image Monitor
• telnet
• Web Image Monitor
• telnet
Disabled Condition
All applications that
operate over IPv4
cannot be used.
IPv4 cannot be disabled
from Web Image
Monitor when using
IPv4 transmission.
All applications that
operate over IPv6
cannot be used.
Functions that require
FTP cannot be used.
You can restrict
personal information
from being displayed by
making settings on the
control panel using
"Restrict Display of User
Information".*1