Ricoh PRO C900 Operating Instructions Manual page 62

2. Authentication and its Application
8. Press [Change] for "Login Name Attribute".
2
9. Enter the login name attribute, and then press [OK].
Use the Login Name Attribute as a search criterion to obtain information about an authenticated user.
You can create a search filter based on the Login Name Attribute, select a user, and then retrieve the
user information from the LDAP server so it is transferred to the machine's address book.
To specify multiple login attributes, place a comma (,) between them. The search will return hits for
either or both attributes.
Also, if you place an equals sign (=) between two login attributes (for example: cn=abcde, uid=xyz),
the search will return only hits that match the attributes. This search function can also be applied when
Cleartext authentication is specified.
When authenticating using the DN format, login attributes do not need to be registered.
The method for selecting the user name depends on the server environment. Check the server
environment and enter the user name accordingly.
60