Ricoh PRO C900 Operating Instructions Manual page 119

4. Press [Permit SNMPv3 Communication].
If the setting to be specified does not appear, press [ Next] to scroll down to other settings.
5. Press [Encryption Only].
6. Press [OK].
7. Press the [User Tools] key.
• To use Web Image Monitor for encrypting setting configuration data, you must first specify [Permit
SNMPv3 Communication] on the machine, and then configure the network administrator's [Encryption
Password] setting and specify the encryption key in Web Image Monitor. For details about specifying
[Encryption Password] in Web Image Monitor, see Web Image Monitor Help.
• If network administrator's [Encryption Password] setting is not specified, the data for transmission may
not be encrypted or sent. For details about specifying the network administrator's [Encryption
Password] setting, see "Registering the Administrator".
• p.32 "Logging on Using Administrator Authentication"
• p.34 "Logging off Using Administrator Authentication"
• p.27 "Registering the Administrator"
Protection Using Encryption
117
5