Ricoh PRO C900 Operating Instructions Manual page 143

Error Code
W0400-202
W0400-202
W0406-003
W0409-000
W0511-000
W0607-001
W0606-004
Cause
1. The SSL settings on the
authentication server and the
machine do not match.
2. The user entered
sAMAccountName in the user
name to log in.
An authentication error
occurred because the user
name contains a space, colon
(:), or quotation mark (").
Authentication timed out
because the server did not
respond.
The authentication server login
name is the same as a user
name already registered on the
machine. (Names are
distinguished by the unique
attribute specified in LDAP
authentication settings.)
An authentication error
occurred because the address
book is being used at another
location.
Authentication failed because
the user name contains
language that cannot be used
by general users.
Authentication Does Not Work Properly
Solution
Make sure the SSL settings on
the authentication server and
the machine match.
If a user enters
sAMAccountName as the login
user name, ldap_bind fails in a
parent/subdomain
environment. Use
UserPrincipleName for the
login name instead.
Recreate the account if the
account name contains any of
these prohibited characters.
If the account name was
entered incorrectly, enter it
correctly and log in again.
Check the network
configuration, or settings on the
authenticating server.
1. Delete the old, duplicated
name or change the login
name.
2. If the authentication server
has just been changed, delete
the old name on the server.
Wait a few minutes and then try
again.
Do not use "other", "admin",
"supervisor" or "HIDE*" in
general user accounts.
7
141