Ricoh PRO C900 Operating Instructions Manual page 124

6. Specifying the Extended Security Functions
• On
• Off
Settings by SNMP v1 and v2
This can be specified by the network administrator. When the machine is accessed using the SNMPv1,
v2 protocol, authentication cannot be performed, allowing machine administrator settings such as
the paper setting to be changed. If you select [Prohibit], the setting can be viewed but not specified
with SNMPv1, v2.
• Prohibit
• Do not Prohibit
Authenticate Current Job
This function is not available on this model.
Password Policy
This can be specified by the user administrator.
The password policy setting is effective only if [Basic Auth.] is specified.
This setting lets you specify [Complexity Setting] and [Minimum Character No.] for the password. By
6
making this setting, you can limit the available passwords to only those that meet the conditions
specified in [Complexity Setting] and [Minimum Character No.].
If you select [Level 1], specify the password using a combination of two types of characters selected
from upper-case letters, lower-case letters, decimal numbers, and symbols such as #.
If you select [Level 2], specify the password using a combination of three types of characters selected
from upper-case letters, lower-case letters, decimal numbers, and symbols such as #.
• Level 2
• Level 1
• Off
• Minimum Character No. (0)
@Remote Service
Communication via HTTPS for @Remote Service is disabled if you select [Prohibit].
• Prohibit
• Do not Prohibit
• p.77 "Protecting the Address Book"
• p.113 "Setting the SSL / TLS Encryption Mode"
122