PTO Clutch Adjustment
1. To adjust clutch, tighten or loosen locknuts on flange
studs.
2. Check adjustment by inserting feeler gauge through
slots next to flange studs.
3. The proper disengaged clearance between the clutch
plates is 0.011 - 0.021 inches. It will be necessary to
check this clearance at each of the three slots to ensure
the plates are parallel to each other.
Adjustments
Page 7 - 4
1
2
Figure 3
1. PTO clutch
2. Flange studs
Groundsmaster
®
455-D