Idler Pulley Service - Toro Groundsmaster 455-D Service Manual

Idler Pulley Service

Apply Loctite 242 or equivalent to threads of bolt secur-
ing idler pulley to deck. Tighten bolt to a torque of 35 to
40 ft-lb.
When installing V-groove idler pulleys, make sure bolt
heads are facing down.
Install idler pulley
in hole closest to edge
of pulley support
With optional high speed
(larger diameter) gearbox pulley,
install idler pulley in this hole
Loctite 242
35 - 40 ft-lb
Install V-groove
idler pulleys so bolt
heads are facing down
Repairs
Make sure center idler pulley on center deck is installed
in hole closest to edge of pulley support. Install in
adjacent hole if using optional high speed (larger diame-
ter) gearbox pulley.
Loctite 242
35 - 40 ft-lb
Figure 41
Loctite 242
35 - 40 ft-lb
Figure 42
Page 8 - 30
Loctite 242
35 - 40 ft-lb
Install V-groove
idler pulleys so bolt
heads are facing down
®
Groundsmaster 455-D