Specifications
Item
________________________________________________________________________________________________________________________________________________________
PTO Clutch air gap
________________________________________________________________________________________________________________________________________________________
Belt adjustment
Special Tools
Order special tools from TORO SPECIAL TOOLS AND
APPLICATIONS GUIDE (Commercial Products) .
Bearing Locknut Wrench (TOR4050)
Use this tool (TOR4050) to remove and install the PTO
drive pulley bearing locknut (Fig. 6, Item 1).
Bearing Locknut Wrench (TOR4051)
Use this tool (TOR4051) to remove and install the PTO
lower driven pulley bearing locknut (Fig. 10, Item 30).
Specifications
Some tools may be listed in the Groundsmaster 455-D
Parts Catalog. Tools may also be available from a local
supplier.
Page 7 - 2 Rev. A
Specification
0.011 - 0.021 inches
180 ft-lb torque
(20 inch long torque wrench
in square hole of clutch plate)
®
Groundsmaster
455-D