Safety Door Service - Toro Groundsmaster 455-D Service Manual

Safety Door Service

When assembling safety door actuator, adjust threaded
rod to get a dimension of 6.25" between center of each
ball joint.
Apply Loctite 242 or equivalent to threads of each ball
joint before installing in deck and safety door.
®
Groundsmaster 455-D
After installing actuator, adjust threaded rod so lower
edge of door is even to 0.25" higher than lower edge of
door guide when wing decks are in fully raised (trans-
port) position, then tighten jam nuts (see Safety Door
Adjustment).
Door guide
Figure 38
Page 8 - 27
Loctite 242
Threaded
rod
Safety door
6.25"
Repairs