Chapter 1: Introduction; Purpose - Avaya 9012FC IO Manual

Chapter 1: Introduction

Purpose

This document provides information about the cooling modules for the Virtual Services Platform
9010 and the Virtual Services Platform 9012.
The following list shows the different cooling module types for the VSP 9000 according to the
configured mode:
• Virtual Services Platform 9010 uses the following cooling module type:
- 2 x 9010CM cooling module
• Virtual Services Platform 9012 uses the following two types of cooling modules when
configured in first generation mode:
- 2 x 9012FC IO cooling module
- 2 x 9012RC SF cooling module
• Virtual Services Platform 9012 uses the following two cooling module types when you configure
second generation modules in second generation mode:
- 2 x 9012FCHS cooling module
- 2 x 9012RC SF cooling module
Note:
The Virtual Services Platform 9000 supports the 9048XS-2 module in first generation mode and
second generation mode. The Virtual Services Platform 9012 requires the 9012FCHS I/O
cooling module to be installed before you install the 9048XS-2 module.
• For information about environmental specifications for the chassis, see Installing the Avaya
Virtual Services Platform 9000, NN46250-304.
• For information about Installing the 9048XS-2 I/O module, see Release Notes for Avaya Virtual
Services Platform 9000, NN46250-401.
Installing Cooling Modules in Avaya VSP 9000
6
Comments? infodev@avaya.com
March 2015