Avaya 9012FC IO Manual page 57

When you remove a cooling module, allow time for the fans to spin down before you fully
withdraw the cooling module. Be careful to keep your fingers out of the fan blades.
2. Grasp the handle and slide the module out of the chassis until it is partially removed, as
shown in the following figure. Allow time for the fans to spin down.
3. Continue to slide the module out of the chassis and use your free hand to support the weight
at the rear of the module.
March 2015
Removing the SF cooling module for the VSP 9012
Installing Cooling Modules in Avaya VSP 9000
Comments? infodev@avaya.com
57