Avaya 9012FC IO Manual page 21

Value
REAR zone:
For Virtual Services Platform
9010, no rear fan controllers exist.
Note:
For VSP 9012, rear fan
controllers exist and the
output displays different
values.
Fan Info:
March 2015
Extended Zone:
FPGA Highest Temperature
FA Highest Temperature
Mode:
Mode Status:
Highest Temperature
FAN 1
FAN 2
FRONT FAN 1 Unit 1
FRONT FAN 1 Unit 2
FRONT FAN 1 Unit 3
FRONT FAN 1 Unit 4
FRONT FAN 2 Unit 1
FRONT FAN 2 Unit 2
FRONT FAN 2 Unit 3
FRONT FAN 2 Unit 4
Installing Cooling Modules in Avaya VSP 9000
Comments? infodev@avaya.com
Virtual Services Platform 9010
Description
This information applies only to
second generation modules.
Specifies the temperature of the
FPGA sensors. A value of --
indicates that this sensor is not
available on this slot.
This information applies only to
second generation modules.
Specifies the temperature of the
FA sensor, located on the slice. A
value of -- indicates that this
sensor is not available on this slot.
For VSP 9010, no rear fan zone
exists, as a result, Mode always
displays as NORMAL.
For VSP 9010, no rear fan zone
exists, as a result, the Mode
Status always displays as Normal.
For VSP 9010, no rear fan zone
exists, as a result, the temperature
always reports as 0 C.
Specifies the module type under
card type.
Specifies the module type under
card type.
Specifies the status of a fan in the
first cooling module.
Specifies the status of a fan in the
first cooling module.
Specifies the status of a fan in the
first cooling module.
Specifies the status of a fan in the
first cooling module.
Specifies the status of a fan in the
second cooling module.
Specifies the status of a fan in the
second cooling module.
Specifies the status of a fan in the
second cooling module.
Specifies the status of a fan in the
second cooling module.
21