Avaya 9012FC IO Manual page 35

Figure 10: Heat sensor locations in a second generation I/O module
Use the following table to understand the heat sensors in the preceding I/O modules for first
generation and second generation modules.
Table 15: Zone to heat sensor mapping for first generation .and second generation I/O modules
Zones
zone 1
zone 2
zone 3
zone 4
zone 5
The system monitors the temperature every 30 seconds and displays the temperature on all the
modules with the following command: show sys-info temperature
Note:
The I/O module alarm threshold and shutdown threshold temperatures differ for the Virtual
Services Platform 9010 and the Virtual Services Platform 9012.
The following example shows command output for both first and second generation I/O modules.
Switch:1#show sys-info temperature
Temperature Info :
March 2015
Heat sensors
address 90
address 92
address 98
address 94
address 96
Installing Cooling Modules in Avaya VSP 9000
Comments? infodev@avaya.com
Virtual Services Platform 9012
35