Table of Contents
Advertisement
GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTE-
NANCE
Attach the boom swing control safety devices.
Set the lock lever securely in LOCK position (L).
Turn the ignition key to the OFF position (A).
Remove the ignition key, close the doors and windows and
leaving the key at a preset location.
EMERGENCY EXIT FROM OPERATOR'S CAB
•
If it should be impossible to open the door of the cab, break the window glass with the hammer supplied
and use the window as an emergency escape.
•
When escaping, remove all the pieces of glass from the window frame first and be careful not to cut your-
self on the glass. Be careful also not to slip on the broken pieces of glass on the ground.
ELECTROMAGNETIC INTERFERENCE
When the machine is operating close to a source of high electromagnetic interference, such as a radar station,
some abnormal phenomena may be observed.
•
The display on the monitor panel may behave erratically.
•
The warning buzzer may sound.
These effects do not signify a malfunction and the machine will return to normal as soon as the source of inter-
ference is removed.
DO NOT GET CAUGHT IN WORK EQUIPMENT
The clearance in the area around the work equipment changes according to the movement of the link. If you are
caught, this may lead to serious personal injury or death. Do not allow anyone near any of the rotating or tele-
scopic parts.
2-24
WENAM00130
SAFETY
Advertisement
Chapters
Table of Contents
