Method For Traveling On Road - Komatsu PW118MR-11 Operation & Maintenance Manual

OPERATION

METHOD FOR TRAVELING ON ROAD

• Before moving the machine, make sure that you perfectly know the control functions and all safety
regulations.
• The operator must be seated in the driving position with fastened seat belt.
• Observe all road traffic regulations of the country in which the machine is used.
• Actuate the rotating lamp and obscure or turn off the working lights.
• Check that the turret is facing towards the front swing axle.
NOTICE
• The travel direction must be selected with the engine
at a low speed and the machine idle.
Travel on the road
1.
Check that there are no persons or obstacles in the surrounding area.
2.
Start the engine and set the controls lock lever (1) in the
FREE position (F).
3.
Position the swing support and the boom by aligning the
collimation marks as shown in the figure.
MACHINE OPERATIONS AND CONTROLS
k k
WARNING
WENAM00130
RKA48659
RKA52340
3-191