Method For Parking Machine - Komatsu PW118MR-11 Operation & Maintenance Manual

OPERATION

METHOD FOR PARKING MACHINE

k k
• Place the machine on a firm and level place.
Do not park the machine on a slope.
If it is unavoidably necessary to park the machine on a
slope, place block under the wheels. As an additional
safety measure, stick the bucket into the ground.
• If the control lever is touched by accident, the machine
may move suddenly, and this may lead to serious per-
sonal injury or death. Always set the lock lever secure-
ly to LOCK position before leaving the operator's seat.
• Lower the blade and/or outriggers to the ground on
the slope side.
• Check that the turret is pointing towards the front
swing axle and align the turret to the lower chassis to
descend from the machine using the steps and han-
dles provided. .
1.
Rest the outriggers, blade bucket on the ground; if there
insufficient space, the work equipment are folded into the
transport position.
2.
Turn the fuel control dial (1) to Low idle (MIN) position and
lower the engine speed.
3.
Set the drive selection switch (2) to the neutral position.
WARNING
WENAM00130
MACHINE OPERATIONS AND CONTROLS
RKA48657
RKA48490
3-213