Table of Contents
Advertisement
HANDLE BUCKET WITH HOOK
HANDLE BUCKET WITH HOOK
When using the bucket with hook, check that there is no damage to the hook, stopper, or hook mount. If there is
any problem, ask your Komatsu distributor.
PRECAUTIONS FOR OPERATION
PRECAUTIONS FOR LIFTING OPERATIONS
•
During lifting operations, reduce the engine speed and per-
form the operation in L mode.
•
Depending on the posture of the work equipment, there is
a danger that the wire or load may slip off the hook. Al-
ways be careful to maintain the correct hook angle to pre-
vent the slipping-off.
•
Never drive the machine while lifting a load.
•
If the bucket with hook is turned 180 deg. and used for op-
erations, it will hit the arm during the bucket DUMP opera-
tion. Be careful when using it.
•
If you are planning to newly install a hook, ask your Ko-
matsu distributor for installation.
6-8
WENAM00130
ATTACHMENTS AND OPTIONS
Advertisement
Chapters
Table of Contents
