York YK-EP B Operation & Maintenance Manual page 3

FORM 160.87-OM1
ISSUE DATE: 8/24/2018
In complying with Johnson Controls' policy for con-
tinuous product improvement, the information con-
tained in this document is subject to change without
notice. Johnson Controls makes no commitment to
update or provide current information automatically
to the manual or product owner. Updated manuals, if
applicable, can be obtained by contacting the nearest
Johnson Controls Service office or accessing the John-
son Controls QuickLIT website at
johnsoncontrols.com.
It is the responsibility of rigging, lifting, and operating/
service personnel to verify the applicability of these
documents to the equipment. If there is any question
YK-EP Installation Checklist and Request for Startup Engineer
YK-EP Startup Checklist
YK-EP Maintenance Log Sheet
YK-EP Installation and Reassembly
YK-EP Operation Manual
Wiring Diagram - YK-EP Style B Chillers with OptiView Control Center Water Pump Starters
Wiring Diagram - YK-EP Style B Chillers with OptiView Control Center Field Control Modifications
Wiring Diagram - YK-EP Style B Chillers with OptiView Control Center and Electro-Mechanical Starter
Wiring Diagram - YK-EP Style B Chillers with OptiView Control Center and Modbus SSS/VSD
Wiring Diagram - YK-EP Style B Chillers Field Connections for MVVSD
Wiring Diagram - YK-EP Style B Chillers with OptiView Control Center and Motor Monitoring
Wiring Diagram - YK-EP Style B Chillers with OptiView Control Center and Motor Space Heater
Liquid Cooled Solid State Starter - Operation
Medium Voltage Variable Speed Drive (2300v - 6600v) - Operation
Unit Mounted Medium Voltage Solid State Starter (2300v - 4160v) - Operation
Medium Voltage Variable Speed Drive (10,000v - 13,800v) - Operation
Solid State Starter (Mod A) - Operation and Maintenance
Long-Term Storage Requirements - General
Long-Term Storage Requirements - Field Preparation
Long-Term Storage - Periodic Checklist and Logs
JOHNSON CONTROLS
CHANGEABILITY OF THIS DOCUMENT
http://cgproducts.
ASSOCIATED LITERATURE
DESCRIPTION
regarding the applicability of these documents, rig-
ging, lifting, and operating/service personnel should
verify whether the equipment has been modified and
if current literature is available from the owner of the
equipment prior to performing any work on the chiller.
CHANGE BARS
Revisions made to this document are indicated with a
line along the left or right hand column in the area the
revision was made. These revisions are to technical in-
formation and any other changes in spelling, grammar
or formatting are not included.
FORM NUMBER
160.87-CL1
160.87-CL2
160.87-MR1
160.87-N1
160.87-OM1
160.87-PW1
160.87-PW2
160.87-PW4
160.87-PW5
160.87-PW8
160.87-PW11
160.87-PW12
160.00-O2
160.00-O6
160.00-O7
160.00-O8
160.46-OM3.1
50.20-NM1
50.20-NM5
50.20-CL5
3