Table 1 - Addresses And Associated Data - York YK-EP B Operation & Maintenance Manual

FORM 160.87-OM1
ISSUE DATE: 8/24/2018
The following table indicates the valid display range
for each of the analog input values. In the event that the
input sensor is reading a value outside of these ranges,

TABLE 1 - ADDRESSES AND ASSOCIATED DATA

ANALOG INPUT
Leaving Chilled Liquid Temperature
Return Chilled Liquid Temperature
Leaving Condenser Liquid Temperature
Return Condenser Liquid Temperature
Evaporator Refrigerant Temperature (Optional)
Discharge Temperature
Oil Temperature
Condenser Pressure
Condenser Temperature
Evaporator Pressure
Evaporator Temperature
Oil Pump Pressure
High Speed Thrust Bearing Proximity Position
(Style E and earlier chillers with G, H, or J
compressors and Style F and later chillers
with J or H3 compressors)
Refrigerant Level
Drop Leg Refrigerant Temperature
Motor Winding Temperature – RTD
(Phase A, B, C)
Motor Winding Temperature – 50K Ohm
Transmitter (Phase A, B, C)
Motor Bearing Temperature – RTD (Shaft End
and Opposite End)
Motor Bearing Vibration – Accelerometer
(Shaft End and Opposite End)
*Saturation temperatures are calculated values. They will display XXX if the pressure used for the calculation is out of range.
JOHNSON CONTROLS
SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION
ANALOG INPUT RANGES
the < or > symbols will be displayed beside the mini-
mum or maximum value, respectively.
ENGLISH RANGE
LOW HIGH
0.0
0.0
8.0 133.5
8.0 133.5
0.0 126.1
31.8 226.3
31.8 226.3
0.0 315.0
-98.7 160.1
5.5
-44.9
0.0 315.0
8.0
0.0 100.0
0.0 121.7
32.0 399.5
31.2 412.5
32.0 399.5
0.0
METRIC RANGE
UNITS LOW
82.0 °F -17.7
94.1 °F -17.7
°F -13.3
°F -13.3
°F -17.7
°F -0.1
°F -0.1
PSIG 0.0
°F -72.6
77.4 PSIG 37.9
64.7 °F -42.7
PSIG 0.0
99.0 Mils -7.1
% 0.0
°F -17.7
°F 0.0
°F -0.5
°F 0.0
30.0 _ _
2
HIGH UNITS
27.7 °C
34.5 °C
56.3 °C
56.3 °C
52.3 °C
107.9 °C
107.9 °C
2172.4 KPAG
71.7 °C
533.7 KPAG
18.1 °C
2172.4 KPAG
148.8 °C
100.0 %
49.8 °C
204.2 °C
211.4 °C
204.2 °C
_ _
21