Section 4 - Printing; Printing Overview; Figure 68 - Printer - York YK-EP B Operation & Maintenance Manual

FORM 160.87-OM1
ISSUE DATE: 8/24/2018
OKIPOS 441 Serial
Charcoal p/n 62113901
Beige p/n 62113601

FIGURE 68 - PRINTER

PRINTING OVERVIEW

A printer can be connected to the Control Center's
Microboard to print the following reports. The screen
from which each report can be generated is listed in
parenthesis.
• Status - Present system parameters (Printer, Home)
• Setpoints - Present programmed values of all set-
points (Printer, Setpoints)
• Schedule - Present value of programmed daily
schedule (Printer, Schedule)
• Sales Order - Information about SALES ORDER
Screen (Printer, Sales Order)
• History - System parameters at the time of the last
normal stop, last fault while running and last 10
faults, whether running or not (Printer, History)
• Cycling or Safety Shutdown Initiated Print -
Snapshot of all system parameters at instant of
shutdown. Automatically occurs if printer is con-
nected at time of shutdown.
JOHNSON CONTROLS

SECTION 4 - PRINTING

• Adaptive Capacity Control (ACC) Surge Map
- System conditions at instant all surge points
were mapped. (Compressor Motor Variable Speed
Drive applications; Access Level Required: SER-
VICE level) (Printer, ACC)
• Trend - Prints a snapshot of the existing TREND
Screen data or prints new data collected after the
TREND PRINT key is pressed.
The printer can be permanently connected to the Con-
trol Center or connected as required to produce a report.
If permanently connected, a DATA LOGGING feature
can produce a status report automatically, beginning at
an Operator selected start time and occurring at an Op-
LD16572
erator selected interval thereafter.
The following figures are examples of the different
print reports. Solid State Starter application print re-
ports shown. Electro-Mechanical Starter and Variable
Speed Drive reports are similar but print parameters
applicable to those devices.
• Figure 64 - Status on Page 190
• Figure 65 - Setpoints on Page 192
• Figure 66 - Schedule on Page 194
• Figure 67 - Sales Order on Page 194
• Figure 68 - History on Page 196
• Figure 69 - Security Log on Page 198
• Figure 70 - Trend on Page 198
• Figure 71 - CUSTOM Screen on Page 198
• Figure 72 - Adaptive Capacity Control New Map
point Report on Page 199
• Figure 73 - Adaptive Capacity Control Existing
Map points Report on Page 199
4
185