Enabling Snmp Service; Configuring Snmp Version 3 Management Access; Setting The Local Engine Id - Nortel BES50GE-12T PWR User Manual

46 BES50 advanced features configuration

Enabling SNMP service

Use the SNMP Agent page to enable SNMP service for all management
clients (versions 1, 2c, 3).
Procedure steps
Step
1
2
3
Variable definitions
Variable
SNMP Agent Status
Configuring SNMP version 3 management access
Use these procedures to configure SNMP version 3 management access to
the BES50.
Navigation
•
•
•
•
•
•
•

Setting the local engine ID

Use this procedure to set the SNMP version 3 engine ID on the BES50 if it
is different from the default value or if it has been deleted.
If this local default engine ID is deleted or changed, all SNMP users are cleared
and all existing users must be reconfigured.
Copyright © 2006, Nortel Networks
.
Action
From the main menu, choose Configuration > SNMP > Agent
Status.
Select the Enable check box.
Click Submit.
Value
Select to enable SNMP on the switch.
"Setting the local engine ID" (page 46)
"Setting a remote engine ID" (page 47)
"Setting SNMP version 3 views" (page 48)
"Configuring SNMP version 3 users" (page 49)
"Changing the assigned group for an SNMP version 3 user" (page 50)
"Configuring remote SNMP version 3 users" (page 51)
"Creating SNMP version 3 groups" (page 52)
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301 01.01 Standard
1.00 October 2006
—End—
ATTENTION
SMB
Nortel Networks Confidential