IBM Storwize V7000 Unified Series Problem Determination Manual page 294

Hide thumbs Also See for Storwize V7000 Unified Series:
Table of Contents

Advertisement

270
Storwize V7000 Unified: Problem Determination Guide Version
Table 46. Upgrade error codes and recommended actions (continued)
Error
Code
Explanation
01B9
Failed to check the Storwize V7000
version.
01BA
Unable to verify the correct
software version.
01BC
Check the health of DDN storage
systems.
01BD
Unable to update software
repository.
01BE
Unable to distribute upgrade
callbacks.
01C0
Asynchronous replication is
running. Stop asynchronous
replication and continue with the
upgrade.
01C1
Asynchronous replication failed to
stop. Stop asynchronous replication
and continue with the upgrade.
01C2
Failed while checking for current
running asynchronous jobs.
01C3
Could not stop CTDB.
01C5
Could not reinstall Lib_Utils.
01C6
Failed while running
sonas_update_yum.
01C7
Unable to get list of system nodes.
01C8
Failed while running cnrsscconfig. Contact your next level of support.
01C9
Unable to install CIM
configuration.
01CA
Unable to get name of system.
01CB
Unable to install GPFS packages.
01CC
Could not install platform. Upgrade
on target system.
01CD
Unable to mount GPFS file systems. See "Checking the GPFS file system
01CF
Unable to configure node.
01D0
Unable to disable call home.
01D1
Unable to enable call home.
01D2
Failed to stop GPFS.
Action
This could be caused by a number of
issues. Check Monitoring > Events under
both the block tab and the file tab on the
management GUI for an event that could
have caused this error and follow the
recommended action. If there is no
obvious event that could have caused
this error, refer to "File module to control
enclosure" on page 27.
Contact your next level of support.
Contact your next level of support.
Contact your next level of support.
Contact your next level of support.
Stop asynchronous replication by typing
stoprepl gpfs0 --kill.
Stop asynchronous replication by typing
stoprepl gpfs0 --kill.
Type lsrepl;echo $?. If the return code
is 0, start the upgrade again. If the return
code is any other number, contact your
next level of support.
Contact your next level of support.
Contact your next level of support.
Contact your next level of support.
Contact your next level of support.
Contact your next level of support.
Contact your next level of support.
Contact your next level of support.
Contact your next level of support.
mount on each file module" on page 162.
Contact your next level of support.
Contact your next level of support.
Contact your next level of support.
Contact your next level of support.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents