Avaya S8800 Installing page 23

5. Pull out the mounting bracket pin (7) and slide the mounting bracket (8) into the
6. Push the bracket into the slide rail until the spring-loaded pin snaps into place.
7. Place the cable-management arm on the support arm.
8. Pull out the cable-management arm pin (9), and then slide the cable-
9. Push the tab until it snaps into place.
10. Pull out the other cable-management arm pin (11), and then slide that cable
11. Push the tab until it snaps into place.
12. Attach the power cords and other cables to the rear of the server (including
13. Route the cables and power cords on the cable-management arm (13) and secure
Installing the Avaya S8800 Server for Avaya Aura
slide rail onto which you are installing the cable-management arm. See the following
figure.
management arm tab (10) into the slot on the inside of the slide rail. See the
following figure.
management arm tab into the slot (12) on the outside of the slide rail. See the
preceding figure.
keyboard, monitor, and mouse cables, if required).
them with cable ties or hook-and-loop fasteners. See the following figure.
Collaboration Server
®
Installing the Avaya S8800 Server
December 2010 23