Associating A Port To A Vrf Instance - Avaya Virtual Services Platform 9000 Series Configuration Manual

OperRouting
HighSecureEnable
IngressRatePeak
IngressRateSvc
EgressRateLimitState
EgressRateLimit
Action
Result

Associating a port to a VRF instance

Associate a port to a Virtual Router Forwarding (VRF) instance so that the port becomes a
member of the VRF instance.
You can assign a VRF instance to a port after you configure the VRF. The system assigns ports
to the GlobalRouter, VRF 0, by default.
1. In the Device Physical View tab, select a port.
2. In the navigation tree, open the following folders: Configuration > Edit > Port.
3. Click General.
4. Click the VRF tab.
Configuration — Ethernet Modules
Name
Associating a port to a VRF instance
Description
Displays the currently saved AdminRouting
value.
Enables or disables the high secure feature
for this port.
Configures the peak rate in Kb/s.
Configures the service rate in Kb/s
Enables or disables egress port-based
shaping to bind the maximum rate at which
traffic leaves the port.
Configures the egress rate limit in Kb/s.
Performs one of the following actions on the
port
• flushMacFdb - flush the MAC forwarding
table
• flushArp - flush the ARP table
• flushIp - flush the IP route table
• flushAll - flush all tables
• triggerRipUpdate - manually trigger a RIP
update
• clearLoopDetectAlarm - manually enable
the port on all the disabled vlans.
Displays result of the selected action.
June 2011 23