Ethernet module configuration using EDM
5. To the right of the BrouterVrfId box, click the ellipsis (...) button.
6. In the BrouterVrfId dialog box, select the required VRF.
7. Click OK.
8. Click Apply.
VRF field descriptions
Use the data in the following table to use the VRF tab.
VrfIds
VrfNames
VrfCount
BrouterVrfId
BrouterVrfName
24
Configuration — Ethernet Modules
Name
Description
Specifies the ID of the current VRF of this
port.
Specifies the name of the current VRF of this
port.
Specifies how many VRFs this port is
associated to.
Specifies the ID of the new VRF to apply to
this port.
Specifies the name of the new VRF to apply
to this port.
June 2011