Avaya Virtual Services Platform 9000 Series Configuration Manual page 22

Ethernet module configuration using EDM
VendorDescr
AdminStatus
OperStatus
LastChange
LinkTrap
AutoNegotiate
AdminDuplex
OperDuplex
AdminSpeed
OperSpeed
AutoNegAd
QoSLevel
DiffServ
Layer3Trust
Layer2Override8021p
MltID
Locked
UnknownMacDiscard
AdminRouting
22 Configuration — Ethernet Modules
Name Description
Displays the vendor of the connector
plugged in the port.
Configures the port as enabled (up) or
disabled (down) or testing.
Displays the current status of the port.
Displays the timestamp of the last change.
Enable or disable link trapping.
Enables or disables Autonegotiation for this
port.
If AutoNegotiate is false, configures if the
port should connect using full duplex or half
duplex.
Displays the currently saved AdminDuplex
value.
If AutoNegotiate is false, configures the
speed of the port.
Displays the currently saved AdminSpeed
value.
Configures the Custom Autonegotiation
Advertisement (CANA) settings of the port.
Selects the Quality of Service (QOS) level for
this port.
Enables the Differentiated Service feature for
this port.
Configures if the system should trust Layer 3
packets coming from access links or core
links only.
Enables or disables Layer 2 override of
802.1p.
Shows the MLT ID associated with this port.
Shows if the port has been locked.
Discards packets that have an unknown
source MAC address, and prevents other
ports from sending packets with that same
MAC address as the destination MAC
address.
Configures the port as routable or not.
June 2011