Avaya Ethernet Routing Switch 8300 Series Quick Start Manual page 40

Configuration
IP Address for mgmt port in
second CPU Slot
[0.0.0.0/0.0.0.0]:
IP Address for mgmt-virtual-ip
[0.0.0.0/0.0.0.0]:
First net mgmt route
[0.0.0.0:0.0.0.0]:
Second net mgmt route
[0.0.0.0:0.0.0.0]:
Third net mgmt route
[0.0.0.0:0.0.0.0]:
Fourth net mgmt route
[0.0.0.0:0.0.0.0]:
IP address of the default VLAN
[0.0.0.0/0.0.0.0]:
Do you want to save the
changes
[Saving the parameters
updates the files /flash/
boot.cfg and /flash/config.cfg]
(y/n)?
40 Quick Start
Prompt
Enter the IP address of the management port in the second
CPU slot.
Enter the IP address of the virtual management port.
Accept the default, 0.0.0.0/0.0.0.0, if you do not want to
specify an IP address.
Enter the IP address of the first network management
route.
Enter the IP address of the second network management
route (static route from the network management port to a
device in the network).
For security reasons, the system does not accept a route
to a network that conflicts with the main nonmanagement
routing table, and therefore does not accept a default route
of 0.0.0.0.
Enter the IP address of the third network management
route (static route from the network management port to a
device in the network).
Enter an IP address of the fourth network management
route (static route from the network management port to a
device in the network).
Enter the IP address of the default virtual LAN (VLAN).
Enter
Enter
Action
y to save the boot and runtime configuration files.
n if you do not want to save your changes.
May 2011