NOTE: Menu 24.6 replaces the current configuration with your customized
configuration you backed up previously. Menu 24.7.2 shows you the instructions
for uploading the Router Configuration file that replaces the current
configuration file with the default configuration file, i.e., p316.rom. You will lose
all configurations that you had before and the speed of the console port will be
reset to the default of 9600 bps with 8 data bit, no parity and 1 stop bit (8n1). You
will need to change your serial communications software to the default before
you can connect to the Prestige again. The password will be reset to the default
Follow the procedure below to upload the configuration file:
Step 1.
Enter "Y" at the prompt to go into debug mode.
Step 2.
Enter atlc after the Enter Debug Mode message.
Step 3.
Wait for the Starting XMODEM upload message before activating XMODEM upload on your
terminal.
Step 4.
After successful firmware upload, enter atgo to restart the Prestige.
Transferring Files
Prestige 316 Broadband Sharing Gateway / Wireless LAN
of 1234, also.
10-5