Chapter 2 Hardware Installation And Initial Setup; Front Panel Leds And Back Panel Ports; Front Panel Leds - ZyXEL Communications Prestige 316 User Manual

Hardware Installation and Initial Setup
This chapter shows you how to connect the hardware and perform the initial setup.
2.1

Front Panel LEDs and Back Panel Ports

2.1.1 Front Panel LEDs

The LEDs on the front panel indicate the operational status of the Prestige.
The following table describes the LED functions:
LEDs FUNCTION INDICATOR
PWR Power
SYS System
10M LAN LAN
100M LAN
Hardware Installation and Initial Setup
Figure 2-1
Table 2-1
ACTIVE
STATUS
Green On
Off
On
Flashing The system is rebooting.
Green Off
On
Flashing The 10M LAN is sending/receiving packets.
Orange Off
Prestige 316 Broadband Sharing Gateway / Wireless LAN
Front Panel
LED Functions
DESCRIPTION
The power adapter is connected to the Prestige.
The system is not ready or failed.
The system is ready and running.
The 10M LAN is not connected.
The Prestige is connected to a 10 Mbps LAN.
The 100M LAN is not connected.
Chapter 2
2-1