Chapter 2 Hardware Installation & Initial Setup; Front Panel Leds And Rear Panel Ports; Figure 2-1 Front Panel; Table 2-1 Led Descriptions - ZyXEL Communications Prestige 314 User Manual

Hardware Installation & Initial Setup
2.1

Front Panel LEDs and Rear Panel Ports

2.1.1 Front Panel LEDs
The LEDs on the front panel indicate the operational status of the Prestige.
The following table describes the LED functions.
LED FUNCTION
PWR Power
SYS System
10M LAN LAN
1,2,3,4
100M
LAN
1,2,3,4
Hardware Installation & Initial Setup
Prestige 314 Broadband Sharing Gateway with 4-Port Switch
This chapter shows you how to connect hardware and perform the initial setup.

Figure 2-1 Front Panel

Table 2-1 LED Descriptions

COLOR STATUS
Green On
Off
On
Flashing
Green Off
On
Flashing
Orange Off
On
Flashing
MEANING
The Prestige is receiving power.
The system is not ready or failed.
The system is ready and running.
The system is rebooting.
The 10M LAN is not connected.
The Prestige is connected to a 10M LAN.
The 10M LAN is sending/receiving packets.
The 100M LAN is not connected.
The Prestige is connected to a 100Mbps LAN.
The 100M LAN is sending/receiving packets.
Chapter 2
2-1