Chapter 2 Hardware Installation & Initial Setup; Front Panel Leds And Back Panel Ports; Front Panel Leds; Figure 2-1 Front Panel - ZyXEL Communications ZyXEL ZYWALL10 User Manual

Hardware Installation & Initial Setup
This chapter explains the LEDs and ports as well as how to connect the hardware and perform
2.1

Front Panel LEDs and Back Panel Ports

2.1.1 Front Panel LEDs

The LEDs on the front panel indicate the operational status of the ZyWALL.
The following table describes the LED functions:
LEDS FUNCTION INDICATOR
PWR Power
SYS System
10M LAN LAN
100M LAN
LAN
Hardware Installation & Initial Setup

Figure 2-1 Front Panel

Table 2-1 LED functions

ACTIVE
STATUS
Green On
Off
On
Flashing
Green Off
On
Flashing
Orange Off
On
Flashing
ZyWALL 10 Internet Security Gateway
DESCRIPTION
The power adapter is connected to the ZyWALL.
The system is not ready or failed.
The system is ready and running.
The system is rebooting.
The 10M LAN is not connected.
The ZyWALL is connected to a 10M LAN.
The 10M LAN is sending/receiving packets.
The 100M LAN is not connected.
The ZyWALL is connected to a 100Mbps LAN.
The 100M LAN is sending/receiving packets.
Chapter 2
the initial setup.
2-1