Rotating Parts; Sharp Edges; Refrigerants And Oils; High Temperature And Pressure Cleaning - York MILLENIUM YCAS Series Installation Operation & Maintenance

Air-cooled screw liquid chillers
Table of Contents

Advertisement

General Chiller Information & Safety
be carried out by suitably trained and qualified person-
nel. No attempt should be made to gain access to the
control panel or electrical enclosures during normal op-
eration of the unit.

Rotating Parts

Fan guards must be fitted at all times and not removed
unless the power supply has been isolated. If ductwork
is to be fitted, requiring the wire fan guards to be re-
moved, alternative safety measures must be taken to
protect against the risk of injury from rotating fans.

Sharp Edges

The finning on the air cooled condenser coils has sharp
metal edges. Reasonable care should be taken when
working in contact with the coils to avoid the risk of
minor abrasions and lacerations. The use of gloves is
recommended.

Refrigerants and Oils

Refrigerants and oils used in the unit are generally non-
toxic, non-flammable and non-corrosive, and pose no
special safety hazards. Use of gloves and safety glasses
are, however, recommended when working on the unit.
8
The build up of refrigerant vapor, from a leak for ex-
ample, does pose a risk of asphyxiation in confined or
enclosed spaces and attention should be given to good
ventilation. For more comprehensive information on
safety precautions for use of refrigerants and oils, refer
to the Materials Safety Data tables provided on pages 9
through 11.

High Temperature and Pressure Cleaning

High temperature and pressure cleaning methods (e.g.
steam cleaning) should not be used on any part of the
pressure system as this may cause operation of the pres-
sure relief device(s). Detergents and solvents which may
cause corrosion should also be avoided.

EMERGENCY SHUTDOWN

In case of emergency the electrical option panel is fit-
ted with an emergency stop switch CB3 (Circuit Breaker
3). Separate Circuit Breakers, CB1 (System 1) and CB2
(System 2), can also be used to stop the respective sys-
tem in an emergency. When operated, it removes the
electrical supply from the control system, thus shutting
down the unit.
YORK INTERNATIONAL

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents