Installing The Transport Wheels - Toro Greensmaster 1021 Operator's Manual

2
Installing the Transport
Wheel Shafts
Model 04840 Only
Parts needed for this procedure:
1 Right wheel shaft
1 Left wheel shaft
Procedure
1. Apply thread-locking compound to the threads
of the wheel shafts.
2. Thread the right wheel shaft into the drum drive
assembly on the right side of the machine.
Note:
The right wheel shaft is marked with a
"R" on the shaft end and has left-hand threads.
1. Right wheel shaft
3. Torque the shaft to 36 to 45 N∙m (27 to 33 ft-lb).
4. Repeat steps 1 through
shaft to the left side of the machine.
Figure 4
3 to install the left wheel
3
Installing the Transport
Wheels
Optional
Parts needed for this procedure:
Transport Wheel Kit (order separately; contact your
1
authorized Toro distributor)
Procedure
To install the transport wheels, you must first acquire
the Transport Wheel Kit (Model No. 04123). Contact
your authorized Toro distributor for this kit.
1. Install the transport wheels; refer to
the Transport Wheels (page
2. Ensure that the tires are inflated to 83 to 103
kPa (12 to 15 psi).
g284635
7
Installing
19).