Controls - Toro Greensmaster 1021 Operator's Manual

Controls

1. Clutch bail
2. Cutting-unit-drive lever
3. Parking-brake latch
4. Service-brake lever
Figure 7
5. Throttle control
6. Hour meter
7. Lift-assist handle
8. On/Off switch
Clutch Bail
Use the clutch bail
the traction drive.
•
Engage the traction drive: Pull up and hold the
bar to the handle.
•
Disengage the traction drive: Release the bar.
Throttle Control
Use the throttle control
speed.
•
Increase the engine speed: Rotate the lever up.
•
Decrease the engine speed: Rotate the lever
down.
On/Off Switch
The switch (Figure
the engine.
•
Start the engine: Push down on the upper part
of the switch.
•
Shut off the engine: Push down on the lower part
of the switch.
Service-Brake Lever
Use the service brake
machine. Pull the lever toward the handle to engage
the service brake.
Parking-Brake Latch
Use the parking-brake latch
parking brake while you are away from the machine.
•
Engage the parking brake: Engage and hold the
service-brake lever and rotate the parking-brake
latch toward you.
g271082
•
Disengage the parking brake: Pull the
service-brake lever toward the handle.
Cutting-Unit-Drive Lever
Use the cutting-unit-drive lever
or disengage the cutting unit while the clutch bail is
engaged.
•
Engage the cutting unit: Move the lever down.
•
Disengage the cutting unit: Move the lever up.
Hour Meter
The hour meter
hours that the engine has been running. Refer to the
meter for scheduling regular maintenance.
9
(Figure 7) to engage or disengage
(Figure 7) to adjust the engine
7) allows you to start or shut off
(Figure 7) to slow or stop the
(Figure 7) to engage the
(Figure
(Figure 7) records the total number of
7) to engage