Specifications; Attachments/Accessories - Toro Greensmaster 1021 Operator's Manual

Figure 10
1. Lift-assist handle
2. Kickstand—S
TORAGE
position
Figure 11
1. Chassis hole
g273507
3. Kickstand—T
RANSPORT
S position
ERVICE
g278594
2. Kickstand—C -U
UTTING NIT
S position
ERVICE

Specifications

Model 04820
Width
Dry weight* 95 kg (210 lb)
Width of cut
Dependent on traction-drum position [refer to
Height of cut
Dependent on reel speed and reel-drive-pulley
Clip
Engine
speed
Mowing
speed
-W
HEEL
Transport
speed
*Traction unit only. Refer to the cutting unit Operator's
Manual for the weight of each cutting unit.

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
11
Model 04830
84 cm (33 91 cm (36
inches) inches)
100 kg (220
lb)
46 cm (18 53 cm (21
inches) inches)
Adjusting the Traction-Drum Position (page
14)] and use of High Height-of-Cut Kit.
position; refer to Adjusting the Clip
Rate (page 13).
Low idle: 1,900 ± 100 rpm; High idle:
3,450 ± 100 rpm
3.2 km/h (2 mph) to 5.6 km/h (3.5 mph)
8.5 km/h (5.3 mph)
Model 04840
104 cm (41
inches)
107 kg (235
lb)
66 cm (26
inches)