Table of Contents
Advertisement
9)
Pull out the harness of the DRIVE
ASSY PH from the hole of the
printer.
10) Remove the one screw (silver, M4,
6mm), the one screw (silver, M3,
6mm) and the one screw (silver, tap,
8mm) that fix the DRIVE ASSY PH
to the printer.
When carrying out the work
NOTE
described next procedure,
take care not to drop the
coupling gear to inside.
Chapter 4 Disassembly / Assembly and Adjustments
4 - 197
Advertisement
Chapters
Table of Contents
Troubleshooting
